Assembly and maintenance must be performed by Qualified Mechanic.

Vehicles do not come ready-to-ride.

Your vehicle will be shipped in a crate about 95% assembled.  Product must be un-crated and setup by the customer's mechanic. 

 

See Video 

Find a Service Center

  

GoKart, Buggy:

Un-Crate, Install Wheels, Roll Cage, Seats, Lights, Battery, adjust throttle, brake and all systems

Dirt Bike:

Un-Crate, Install Front Wheel, Battery, adjust throttle, brake and all systems

Motorcycle, Scooter, ATV:

Un-Crate, Install Battery, adjust throttle, brake and all systems

Race Kart:

Un-Crate, Install Front Wheels, Steering Wheel, adjust throttle, brake and all systems 

Install Fresh Oil

Drain any engine oil and install fresh 10W/40 before starting any vehicle

 

*some vehicles may offer a mostly assembled option. this will cut the assembly time down from 2 hours to about 20 minutes.  the vehicle will arrive with the wheels and other items already installed. must still be uncrated and setup by customer's qualified mechanic. 

 

Our products are assembled, adjusted and tested at the factory, then packaged in a crate for shipping directly to the customer. see Documentation section of our website for Assembly Guides.

 

Please remember that by purchasing a product Factory Direct, you are responsible for performing the setup that a store or local dealer would normally perform - such as installing/checking the wheels, seats, roll bars, hooking up the fuel line, battery and lights, checking tightness and Torque all Hubs, Nuts and Bolts, changing oil, etc.

 

Although we do provide some very good information on our website, occasionally some units may need other routine items checked/adjusted such as cleaning and adjusting the carburetor and fuel tank, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed. Since you are skipping a dealer and saving over half the price of a usual retail customer, you will need to perform the final assembly (as stated above). This will take generally 2-6 hours or more to perform depending on your product and skill level.  While we will gladly assist you with any technical questions, support we can give over the telephone is limited. We STRONGLY RECOMMEND that a Qualified Mechanic perform the setup of your product. we cannot refund or exchange your unit if you cannot perform these functions or refuse to let a shop do it for you.